XPRESS — general view
XPRESS — detail
XPRESS — detail‹ Tiles & ceramicsRequest a meeting
XPRESS
A reinforced-structure laminating press, designed for constant pressing with minimal maintenance. Ceramic piece forming and lamination integrated into the digital line.
Advantages
Minimal maintenance
The main belt is replaced in under 4 hours; the main drum, in under 2.
Real production
Up to 23,000 m² in 24 hours, at 10 linear metres per minute.
Reduced pressing cost
Roughly a fifth of the cost of traditional pressing.
Large formats
Up to 1600 x 3200 mm fired, in various thicknesses.
23.000 m²
production / 24 h
1800 mm
useful width
4–10 mm
thicknesses
Minimal maintenance
Main stainless-steel belt replacement in under 4 hours; main drum and bearings, in under 2.
Automated feed
A fully automated feed hopper, electronically connected to the main roller.
Synchronised rollers
Independently motorised upper and lower rollers, with electronically controlled synchronism.
Precision cutting
Precise lateral and cross cutting, with 100% of waste recovered back into the process.
Lower power consumption
Installed power 20–30% lower than a traditional 7,500–10,000-tonne press.
Powder flexibility
Presses any type of atomised powder, white or red, with no binder added and no change to the customer's formula.
Technical specifications
Useful width1800 mm
Pressing thicknesses4–10 mm
Large formatsUp to 1600 x 3200 mm (fired)
Production~23,000 m² / 24 h at 10 m/min
Bulk density2.2 g/cm³
Warranty12 months
Delivery times and conditions are confirmed after the technical study of your production line.
Have a question?
We'd be happy to meet with you and answer anything you need.